Leupold Vx-r 125-4x20mm 30mm Matte Firedot Spr 113769 Reviews

Description:
According to Amazon the Leupold VX-R Patrol 1.25-4x20 (Model number 113769, Firedot) has the dimensions of 9.4 x iii.ii ten 2.9 inches.  Information technology has a matte finish, a special purpose reticle and motion sensor technology, per the Leupold production website.  Information technology has a 30mm tube and comes in at around 11.50oz.  I purchased the VX-R from a local gun shop for a little under $520, but information technology can be had for around $480 from many online retailers.  The VX-R has the Firedot special purpose reticle.

According to the LaRue website the LT104 / SPR mountain puts eyes at 1.five inches above the rail for optimal cheek weld. I purchased the LT104 from the LaRue website for $210.

Reason For Purchase:
The VX-R was my first footstep into owning a variable optic.  I did a adept amount of enquiry before making this selection.  I had somewhat of a flexible budget ranging anywhere between $500 and $2500.  Having finger banged a few unlike optics, I was going to default to the Swarovski Z6i, having seen a few different shooters have that optic on their rifles, primarily at the F2S High Stress class, every bit well as the VX6 Multigun which has the aforementioned reticle every bit the VX-R.  After doing some thinking and considering application specific circumstances, I went with the VX-R.  A loftier-terminate optic will not increment my power to apply my rifle.  While information technology will not hinder information technology, I wanted to get the bare minimum requirement while still having some features that I prefer.  In my AO, I volition very rarely, if ever, exist required to make a 100m shot, 4x would actually help for bigotry, and so with these concepts and the understanding that I can ever sell the optic and movement onto some other if information technology was non to my satisfaction, I went with the VX-R.

I originally had ordered 2 piece rings for the VX-R.  After arriving, they were the wrong size, and I had a weekend of shooting coming up and I wanted the VX-R mounted on my burglarize ASAP.  A friend of mine had an LT104 / SPR sitting around that he was saving for a USOptics variable optic, and he let me buy it from him (I ordered a replacement for his afterwards that twenty-four hour period).  LaRue has been my go-to for optic mounts, I have had but positive experience with their LT751 which holds my Aimpoint H1 in identify, a review can be found at the link.  Install was pretty straight frontwards.  I did not practice whatsoever sort of torque spec, I but hand tightened information technology and used the provided loctite.  I found the optimum position for it on the top of my receiver, which is basically the only place I could have put it due to the offset KAC sights.

Start Opinion:
The VX-R came in this box:

The optic came rested in some protective styrofoam sleeves along with a general transmission that transport with every Leupold optic, a tactical reticle hand book (which gives pretty good info), a Leupold sticker (for my non-truck) and the smallest hex wrench you have ever seen, I hateful its damn tiny.  I took the optic, mounted it and went to zero on some steel at around 25y, initially. Zeroing the optic is pretty straight forward, though the manual makes it seem similar its more than complicated and then information technology is.  Yous basically find where the hits are going, twist the top and side turrets (without loosening them up) until you get the optic where you want it (for me it was a 100m zero - F2S website).  Once yous become the optic to hit where you want it, utilize the tiny hex wrench to costless the turrets, each one has 3 prepare screws which are tightened actually well from the factory.  Information technology felt like the wrench was going to snap at whatsoever moment initially trying to loosen them.  Once you become them loosened only twist them to 0 and tighten the turrets.  Now if you exercise adjustments it will click, with the screws loosened the turrets volition merely spin freely.  Once more, not rocket science, I but wish they fabricated it seem a lot easier in the transmission and then they actually did.  I went through this process three times during a recent grade with Bennie Cooley (AAR link here), once I got the zero I wanted I set it and forgot, information technology did non motility for the three days of shooting we did (I confirmed naught every morning).

(picture of hex spiral, for comparison the push button with the golden Leupold logo is slightly larger than i/2 an inch)

The fact that the button with the gold Leupold logo turns the optic on, and so adjusts the 5 effulgence settings is large plus in my stance.  The optic remembers the terminal setting, which for me was always the highest brightness setting.  The fact that the turrets spin freely and that y'all can knock off your nothing with a crash-land is kind of annoying, especially if yous are doing agile work with your rifle on.  Of course its as piece of cake to set up as looking at the optic, seeing it is non on goose egg for both turrets and clicking it over, literally takes two seconds, simply could be a deal breaker for some people. (At worst information technology will throw your zero 3-5 clicks in any management, with at 100m is not that bad of a shot)  The glass on the VX-R is very articulate.  I positioned it then that at the lowest setting (1.25x) it was clearest, since that is the setting I volition virtually likely have it at during any work.

After setting the VX-R to the correct location, I prepare the parallax.

You might observe it is pretty dirty, that is because I had duck tape on it to keep the parallax setting in identify considering information technology does move on you (Protip from Bennie Cooley), I took the tape off for pictures.  To set the parallax you can follow the manual, pretty directly forward.

The LT104 / SPR mount came in the standard LaRue box/bag combo with a wrench, some loctite and all the screws/bits that are required for installation.  The whole install took all over 5 minutes, and that is with me double checking my work going slowly.  The QD release levers were fix to proper tightness (trick is to make sure yous set them and forget, because if you modify the setting you may need to rezero the optic).  The LT104 has the quality I have come up to savor from LaRue and performed the fashion I expected information technology to after I confirmed my zero.  Of class I do non trust any mountain, so I would always reconfirm zero every chance I get, because information technology does, sometimes.

In the Field:

Since buying and installing the VX-R and LT104 I put somewhere betwixt 1700-2100 rounds through my rifle.  At least 1500 (approx.) of those rounds were at a 3 day rifle course.  I have used magnified optics earlier, I had a Trijicon TA31F-G before I bought the Aimpoint H1 and take been running it every since.  And then I am nigh familiar with an RDS in terms of target conquering, holdover and application.  The 1.25x, lowest magnification setting, the VX-R has is not close to the true 1x of an RDS.  The variable optics I have shot or middle-fucked before were not close either, even if they advertised they were, the closest was the Z6i, just for how much it costs, I would not take anything less.  Still, at ane.25x engaging targets 50y, fifty-fifty 100y in was not difficult.  The Firedot that Leupold put into this VX-R is very bright and near-RDS level.  At 30y and in you are basically running an RDS and target acquisition is merely limited by the user, non the optic.  When you get out to 100y, that is when yous need to really focus and concentrate, only and so you can mess with the magnification and find your personal sweetness spot.  I had no issues running the VX-R in the 1.25x magnification the entire class, I used it as if information technology was an RDS and when nosotros did shoot prone, precision or zero shots I turned information technology upwards to 4x.  I did non have any problems with the turrets turning on me and my zero walking.  We did transition, moving and kneeling drills where I had a sling and kit on, it never moved on me.  One aspect that I figured I would take an upshot with is multiple targets, primarily from side to side, each target beingness exterior of my view in the optic.  I found that sometimes I would need to shut my left eye in order to focus my eyes on the reticle and/or the Firedot to keep it from going blurry - only at further distances, since upclose I focus on the target and put the Firedot on information technology - this may be an issue for some.  The optic ran exactly the way I wanted it to and expected it to throughout the class.

Ownership and Usage:

Forgetting to turn off the optic is non a large bargain equally it does non really deplete the battery besides badly.  The fact that yous tin can just hold the unmarried button for 5 seconds and it turns off is a pretty proficient feature.  I would like to find some sort of cap for the forepart and rear, since the glass gets muddy with transport.  There is a motion sensor on it, only I do non utilize it, nor want to employ it.  I guess its fine that information technology is in that location, merely if you keep rails of turning off your optic not much of an issue.  It is non an Eotech that you lot need to fingers to turn on/off, its one unmarried printing of the button.  The LT104 does its job without effect and more than likely volition proceed to do its chore as long as I do my part and non mess with it.

Concluding Thoughts and Recommendations:

This is a no brainer optic.  You lot buy it, slap it in an LT104 and run it to your hearts want.  Information technology will do what you need it to practice every bit long every bit 1.25-4x20 are the specifications you need.  My particular state of affairs may exist different than yours.  If I lived in a rural area with lots of hills and less buildings, I might have gone with the Leupold VX6 one-6x Multigun, and I might nevertheless.  The truth is, I purchased this optic and mount because I wanted to get some experience under my belt without putting a giant hole in my bank business relationship.  Could I utilise a Z6i? Of class, who would not, but is information technology applicable to my specific situation, how about yours?  For a 5.56 rifle, especially an AR15, this optic/mount combo will fit many different applications.  Contrarily, if y'all are looking for a replacement for an RDS this is not it.  If you desire a variable optic that works like an RDS in one setting and a spotting scope in some other, this is definitely not the optic for you.  In fact you will probably be hard pressed to find an optic that does that nether at least twice the price of this optic.  My opinion is that since it is labeled every bit a "Patrol" optic it has simply enough features, and hit the toll bespeak, that many LEO's can purchase, run on a working rifle and non have much of an issue doing anything that a LEO with a working rifle will demand to do.  For the average gamer, this might not be enough, and for those loftier-speed super tacticool operators and/or gamers than demand .5MOA precision, look elsewhere.  For the rest of united states that can exercise just fine with the all-time of the lower end variable optics, this is plenty.

collinsfornam.blogspot.com

Source: http://www.vdmsr.com/2013/10/leupold-vx-r-patrol-125-4x20-firedot-on.html

Share this post